14.2 Updating the firmware

A USB stick is required to update the firmware. Transfer the update files provided by GeBioM to the root folder of a USB stick, disconnect the USB stick and then carry out the following steps:

1	Switch on the printer.
2	Connect the USB stick to the printer. Important: The USB flash drive must be a FAT32 file format.
3	Open the menu Settings (1).
4	Go to the menu Printer information and firmware update (1). Press the Back button (2) to return to the main menu.
5	Select Update printer (3). Press the Back button (2) or Cancel (1) to return to the main menu
6	Click "Yes" (1) twice to confirm this. Press "No" (2) to return to the main menu.
7	Wait until the update is installed.
8	Allow the printer to start, without the USB stick from the printer to remove.
9	Wait until a green   screen with confirmation of the successful update or an ok button is displayed. Some update procedures can take up to one minute.