4.10 Mounting the filament chamber

For installing the filament chamber on the printer:

1  

Cut off the cable tie, if present, that holds the print head cable to the bracket.
2  

Remove the 2 screws mounted on one of the sides of the aluminium profile.
 

3

 Insert the screws into the holes in the angle brackets and fasten the aluminium profile so that the underside of the profile is flush with the lower side of the angle bracket. 

 

  

 WARNING: When placing the aluminium profile, make sure that the print head cable is on the opposite side of the angle brackets.

 
 

4

 Tighten the screws.