| 1 | Guide the filament forwards through the slot. |  |
| 2 | Press down the clamp on the left-hand side so that the hole for threading the filament through is released. |   |
| 3 | Now thread the filament through the hole from the back to the front and then release the clamp. |  |
| 4 | Pull gently on the filament to check that it is correctly inserted and that the spool unwinds smoothly. Then cut off any excess material and insert the filament into the print head (see chapter 7.3). |  |
When inserting a filament spool into the filament chamber, the spool must be aligned correctly to avoid problems.
The spool should be installed so that the filament is unrolled from the top, as shown in the illustration.
It is necessary to use the Filament change menu if:
- Filament is used for the first time
- an empty coil is to be replaced with a new coil
- a spool is to be inserted into a printer that does not contain filament
- filament is to be removed from the printer.
Select the language for the printer menus.
| 1 | Open the menu Settings (1) |  |
| 2 | Select the Language selectionPress the language selection button (1) Press the back button (2) to return to the main menu |  |
| 3 | The arrow (1) indicates the currently selected language. To select a new language, press the desired language to select it and then click on it again to confirm it as the new language. Press the up (2) and down (4) arrow buttons to scroll through the list of available languages. Press the back button (3) to return to the Settings to return. |  |
The printing chamber is equipped with lights that help the user to see inside, but also to indicate the status of the printer. Depending on the status, the colours change as follows:
| 1. print bed calibration Enables access to the print bed calibration process. For more information, see chapter 8. 2. Wi-Fi configuration Enables access to information and configuration of the printer in the local network. Further information can be found in chapter 9. 3. language selection Allows the user to change the language of the printer menu. Further information can be found in chapter 6. 4. printer information and firmware update Displays information about the printer and provides access to the printer's firmware update For more information, see Chapter 13 |
1. print USB
Enables printing via a USB stick.
Further information can be found in section 11.1.
2. filament change
Use the Filament change menu to insert and change the filament in the print head.
Further information can be found in chapter 7.
3. manual control
The manual control gives you access to the movement of the print head and print bed in all three axes of the printer. It also gives you access to manually extrude or pull the filament in or out of the print head.
Further information can be found in chapter 12.
4. settings
Enables access to an additional menu with the following functions:
- Print bed calibration
- Wi-Fi configuration
- Language selection
- Printer information and firmware update
Further information can be found in chapter 5.2
5. printer name
Displays the name of the printer in the local Wi-Fi network. This is defined in the Wi-Fi configuration. By default, it is the name of the printer model.