 | There is a potential risk of burns as the nozzle/print head can reach temperatures in excess of 200°C. Do not touch the nozzle with bare hands. Unless otherwise specified, always allow the machine to cool down for at least 20 minutes before carrying out maintenance work or modifications to the print head. |
Keep away from the drive belts at all times. There is a risk of pinching during operation.
 | The 3D printer CUBIX LITE contains moving parts. The force of the print bed is great enough to cause damage, so stay away from the print bed during operation. Keep away from the drive belts at all times. There is a risk of crushing during operation. |
 | Always unplug the appliance before carrying out cleaning or service work, unless otherwise specified. |
 | The power supply unit should not be tampered with. If it needs to be replaced due to a malfunction, it must only be replaced with the same type of power supply by authorised personnel. |
| An earthed main socket must be used. Ensure that the building installation has special means for overcurrent and short circuit. |
| Always disconnect the appliance from the power supply before carrying out maintenance and service work, unless otherwise specified. |
| Only trained personnel should reach into the control chamber of the machine (accessible from the bottom cover of the machine), with the electrical and electronic parts. |
| Do not place any objects filled with liquids, such as vases or cups, on, around or in the machine. Take care not to pour any liquids into the system. They can cause a breakdown and/or fire hazard. |
This manual contains safety warnings and instructions that apply to the 3D printer, model " CUBIX LITE " apply.
The following signs are used with the safety instructions.
 | Information that is helpful for carrying out an action or avoiding security problems. |
| General warning sign: Warning of a potentially dangerous situation if the safety instructions are not followed (ISO 7010-W001) |
 | Magnetic field warning (ISO 7010-W006) |
| Warning of electrical voltage (ISO 7010-W012) |
| Warning of hot surface (ISO 7010-W017) |
| Warning of hand injuries (ISO 7010-W024) |
The 3D printer CUBIX LITE may only be used after reading the safety instructions and the operating instructions.
Do not use the interior/chamber of the printer for any kind of storage.
Control the 3D printer CUBIX LITE always via the touchscreen on the front and/or the power switch on the back.
Do not use any material other than the compatible CUBIX LITE Filament into the print head.
Never reach into the machine during the printing process.
The main chamber of the machine (print chamber) has a backlight that indicates the machine status. The safe states for accessing the chamber are "Paused", "Idle" and "Print done", which are signalled by a steady or flashing green light.
All other light colours show "operating modes" in which the chamber must not be touched. Further details on backlighting can be found in the operating manual in chapter 5.3.
Do not reach into the print area from the top of the printer. Only use the intended front side when removing the print object for cleaning and maintenance purposes.
Do not touch the nozzle/print head when reaching into the print area to remove the printed product. Nozzle parts become hot during printing.
Do not change any spare parts while the machine is in operating mode, unless expressly stated otherwise for maintenance or service reasons.
Always change the filament using the control panel (touchscreen) by following the standard procedure.
The 3D printer CUBIX LITE is not intended for use by persons with reduced physical and/or mental capabilities or lack of experience and knowledge, unless they are supervised or have received instructions on the use of the appliance from a person responsible for their safety.
Children should never use the machine unsupervised.
When moving the machine, always lift it from below. Do not lift the machine from the side. There is a high risk of damaging the functional structure of the printer. Information on unpacking the machine can be found in the instructions in the Quick Start Guide and in the operating manual in chapter 4 Preparing the printer.
- Filament chamber
For storing the filament used in the printer and to keep the moisture in the filament stable. - Print head
For extrusion of the material. - Print bed
Removable surface on which the object is printed. - USB connection
For printing via a USB stick and updating the printer firmware. - LCD touchscreen
To operate the printer. - On/off switch
Controls the printer's standby mode. - Removal ramp
- 8 Power cable for the filament chamber
Cable that supplies the filament chamber with power. - 9 Print head cable
Power and data cable harness for the print head.
- 10 Exhaust air fan
To ventilate the electronics. - 11 AC mains plug
Input plug for the mains voltage. - 12 Mains switch
For controlling the flow of current to the internal power supply and the filament chamber.
- 13 Extraction fork
- 14 Nozzle
- 15 Hotend
- 16 Extruder
- 17 Filament sensor
The 3D inlay printer CUBIX LITE is a Fused Filament Fabrication (FFF) 3D printer. Its purpose is to print digital 3D models of insoles, which are created in the software GP Manager InsoleCAD The process is designed to transform the moulds into physical objects (inserts) by depositing molten thermoplastic material (known as filament) layer by layer.
The printer has been specially designed to work with the CUBIX LITE Filament developed. Although the printer accepts other filaments (brand and/or material type), the use of these filaments does not provide optimal results and in some cases can lead to permanent damage to the machine.
Warning: Using filament that has not been authorised by the manufacturer/sales representative will invalidate the printer's warranty.
Operating manual
CUBIX LITE
3D printer inserts
GEBIOM GmbH
Wilhelm-Schickard-Straße 12
Germany - 48149 Münster
Phone +49 251 98724 - 0
Fax +49 251 98724 - 22
e-mail cubix@gebiom.de
www.gebiom.de