With the parameter "Increase [N/s]" describes the steepest point of the force curve in the first 50 ms of the measurement.
The parameter "Pulse [Ns]" describes the sum of all pressure values in the displayed period.
The parameter "Passive maximum [N]" describes the maximum of the first peak caused by the passive part of the musculoskeletal system.
The parameter "Maximum [N]" describes the absolute maximum of the displayed gear curve.
You can display the load parameters by ticking the "Load" set.
The parameter "Frequency [Hz]" describes how many steps the test person takes in one minute.
Note:
This parameter is only displayed after being called from GP MobilData.
The parameter "Double contact [s]" describes the time in which both feet are in contact with the ground at the same time. A value above 0 indicates that the test person is walking and not running.
Note:
This parameter is only displayed after being called from GP MobilData.
The parameter "Flight [s]" describes the time in which neither one foot nor the other is in contact with the ground. A value above 0 indicates that the test person is no longer walking but running.
Note:
This parameter is only displayed after being called from GP MobilData.
The parameter "Swing [s]" describes the length of the swing phase of the foot, i.e. the flight time from toe lift to heel touchdown.
Note:
This parameter is only displayed after being called from GP MobilData.
The parameter "Contact [s]" describes the length of the rolling movement of the foot, i.e. the contact time from heel strike to toe lift.