17 Technical data

Name and model: GT George Max

Data transfer: USB 2.0 / USB 3.0

Laser class: 2

Connection: 1 x power, 1 x USB, high speed (red)

Dimension: approx. 625 mm x 290 mm x 275 mm

Weight: approx. 10.2 kg

Load capacity of the measuring surface: max. 150 kg static

Measuring error: +/- 1mm

Operating conditions: +5°C to +35°C, <80 % max. rel. humidity humidity

Power supply unit: 12 V, 5.0 A

In the course of continuous product improvements, we reserve the right to We reserve the right to make technical and design changes.

9. quick guide to measuring with the GT George Max in GP Foot Measurement 3D

To start the module from the start page, you must first select a customer or create a new one. To do this, please click on the following symbol in the top right-hand corner . To create a new customer, click on and fill in at least the mandatory fields (*). Via the arrow 

or double-click on the customer name in the table to return to the start page and start the GP FussMess 3D module.

To open the GP Foot Measurement 3D module, click on the button with the "GP Foot Measurement 3D" icon in the module overview of the GP Manager.

The user interface of the module consists of the menu bar (1), the workspace (2) and the toolbar (3).

After starting the module, the following menu bar is displayed:

The arrow (1) takes you back to the module overview. The name of the module (2) is displayed to the right. If a customer has been called up, the customer name (3) is displayed, otherwise this field is empty. Under the cogwheel button (4) you can make various settings regarding the colour display. If you have any questions or problems with the GP Manager, you can click on the question mark (5) to access the support page gpsupport.com. Click on the folder (6) to open the customer data and call up old measurements, for example. The GeBioM logo (7) is the home button that takes you back to the start page.

The toolbar is located on the left-hand side.
You can change the view of the measurement on the upper half.
You can start new measurements on the lower half and add notes in the free text field.

The exact handling of the individual functions is explained in the next chapter.

4th function

The GT George Max full foot scanner is a 3D scanner that can now scan the entire foot in addition to the plantar information of the foot (i.e. from below). To do this, the device is placed on a firm, non-slip surface. With the GT George Max's laser technology, the entire foot can be scanned in all three dimensions, whether fully, partially or unloaded. It only takes a few seconds to take the image and create a photo of the plantar view. Thanks to the laser technology, the feet are captured with millimetre precision and a detailed 3D image of the feet is obtained. The camera and laser unit are controlled and the measurement data is transferred to the PC via a USB port. The measurement data is displayed on the PC in the GP FussMess3D software module, where it can be further processed.

WARNING

It must be possible to walk or run in front of and behind the device without tripping.

3. scope of delivery

Please first check that the appliance is complete and undamaged. If in doubt, do not use the appliance and contact the manufacturer.

The scope of delivery of the GT George Max includes

  • 1 GT George (laser scanner for measuring the entire foot)
  • 1 power supply unit (12 V, 3.0 A )
  • 1 USB connection cable (approx. 3.0 metres): 1 red with 2 USB ports,
  • 1 foot switch with connection cable (approx. 2.4 metres)
  • 1 instruction manual
  • 2 side footrests

The packaging is reusable or can be returned to the raw material cycle. Please dispose of packaging material that is no longer required properly. If you notice any transport damage during unpacking, please contact the manufacturer immediately.

WARNING

Make sure that the packaging film does not get into the hands of children.

There is a risk of suffocation!

2. device description

1 - On/off switch

2 - Connection for the power supply unit

3 - Control unit and camera connection

4 - Foot switch connection

5 - Serial number

6 - Measuring surface/scan plate

7 - Remove the transport lock before use!

8 - Storage slot (stow)

18 Warranty and repair conditions

,

Please contact the manufacturer in the event of a warranty claim. If you need to send in the device, please state the defect and enclose a copy of the invoice.

 

The following warranty conditions apply:

 

  1. GeBioM mbH products are guaranteed for one year from the date of purchase. In the event of a warranty claim, the date of sale must be proven by the purchase receipt or invoice.
  2. Defects due to material or manufacturing faults will be rectified free of charge within the warranty period.
  3. Warranty service does not extend the warranty period, neither for the appliance nor for replaced components.
  4. Excluded from the guarantee are

 

  1. all damage caused by improper handling, e.g. failure to observe the instructions for use.
  2. Damage caused by repairs or tampering by the buyer or unauthorised third parties.
  3. Transport damage that has occurred on the way from the manufacturer to the consumer or during dispatch to the service centre.
  4. Accessories that are subject to normal wear and tear, such as batteries, sensors, etc.

 

  1. Liability for direct or indirect consequential damage caused by the device is excluded even if the damage to the device is recognised as a warranty case.

 

 

 

GeBioM mbH

Wilhelm-Schickard-Str. 12

48149 Münster (Germany)

Phone: +49 (0)251 / 987240

Fax: +49 (0)251 / 9872422

eMail: info@gebiom.com

Internet: www.gebiom.com

16. user group

,
  • The target group for this device is the specialist in the relevant field: orthopaedic (shoe) technician, engineer, biomechanist, ergonomist, etc.
  • The system is therefore not intended for end users.
  • In principle, the specialist should endeavour to expand and develop his or her specialist knowledge of the biomechanical relationships involved in walking, sitting and running, as the device only provides the basics and the specialist must decide personally on the measures to be taken.

15. notes on disposal

,

This appliance must not be disposed of with household waste. Every consumer is obliged to take all electrical or electronic devices, regardless of whether they contain harmful substances or not, to a collection point in their town or to a retailer so that they can be disposed of in an environmentally friendly manner. Please contact the manufacturer regarding disposal.

14. metrological control

,

The device requires no maintenance or calibration. A metrological check is not required for commercial use.

13. cleaning and care

,
  • Disconnect the appliance from the socket before cleaning it. Do not use any liquid cleaners or sprays. Use a damp cloth for cleaning.
  • The measuring surface of the device must be cleaned with a soft cloth moistened with disinfectant before or after each use.
  • Only use the appliance again when it is completely dry.
  • Do not expose the device to direct sunlight and protect it from dirt and moisture.