Perform measurement

  1. Ensure that the router is connected to the power supply.
  2. Check whether the WLAN stick is connected to the USB port of your computer or whether you have switched on the laptop's internal WLAN.
  3. Please connect the measuring soles to the transmitters. Pay attention to the correct labelling (L = left; R = right).Attention:
    Make sure that the plug engages correctly!
  4. Now place the soles in the shoes and attach the two transmitters to the customer's lower leg using the leg straps (8). The cable should not be under tension (see Figure 1)!
  5. Switch on the transmitter (12). If the transmitter is switched on, the adjacent LED lights up. After a few seconds, the WLAN LED (9) on your transmitter lights up. This means that the transmitter is correctly connected to the router (see Figure 2).
  6. Now establish a connection between the computer and the router. To do this, click on the network symbol (Windows Taskleiste WiFi Symbol or Windows Taskleiste Netzwerk Symbol) in the bottom right corner of the screen. Click on "MODA WiFi router" (see Figure 3). The "Establish connection automatically" tick box should remain ticked.

    Verbindung mit Router herstellen

    Figure 3: Establish connection automatically

  7. Then click on "Connect". The password is: 12345678
  8. A message may appear stating that the connection was not successful and connectivity is restricted (see Figure 3). This message can be closed as it simply indicates that the router has no connection to the Internet. The network symbol is marked with an exclamation mark Windows Taskleiste WiFi Symbol Fehler.

    Fehlermeldung

    Figure 4: Error message

  9. Now open the already installed GP Manager and start a measurement.