Technical data
| Batteries: | 4 Mignon (AA) metal-hydride battery cells: 1.2 Volt, 1000mAh for theoretically 2.5 hours of operation (the use of non-rechargeable batteries (1.5 Volt) is also possible without the charging device) |
| Measuring sole geometry: | 8×8 matrix and 24×16 matrix |
| Frame rates: | 25 to 250 Hz, depending on the matrix size of the measuring soles and the number of optional measuring inputs switched on. The frame rate indicates the number of times all sensors are fully processed per second; the sampling rate is equal to this number multiplied by the total number of all sensors. |
| Max. Number of sensors: | 384 per measuring sole |
| Measuring time per sensor: | approx. 26 microseconds (corresponding to 37.5 kHz) |
| Storage medium: | PC card, type 2, SRAM memory card with battery, 4 or 8 megabytes |
| Parameters of the serial interface: | 9600 baud, 8 data bits, no parity |
| Number of entries on the memory card: | maximum 64 |
| Number of measurement inputs: | 8 |
| (available as an option) | Input impedance: approx. 400 kOhm Voltage range: 0.1 ... 3.95 volts |