13.2 Updating the firmware

A USB stick is required to update the firmware. Transfer the update files provided by GeBioM to the root folder of a USB stick, disconnect the USB stick and then carry out the following steps:

1  

Switch on the printer.
 

2

  

Connect the USB stick to the printer.
Important:  The USB flash drive must be a FAT32 file format.
 

3

  

Open the menu Settings (1).
 

4

  

Go to the menu Printer information and firmware update (1).

Press the Back button (2) to return to the main menu.

 
 

5

  

Select Update printer (3).

Press the Back button (2) or Cancel (1) to return to the main menu
 

6

  

Click "Yes" (1) twice to confirm this.

Press "No" (2) to return to the main menu.

 

 
 

7

  

Wait until the update is installed.
 

8

  

Allow the printer to start, without the USB stick from the printer to remove.
 

9

  

Wait until a green
screen with confirmation of the successful update or an ok button is displayed. Some update procedures can take up to one minute.