Software settings

After replacing the output stages, start the milling computer.

  • Select "Start" -> "Programmes" -> "AC Setup C269" (sometimes also ISEL Germany AG) -> "ACSETUP C269„
  • At the top of the menu, select "File" -> "Open" -> mostly D:\Backup\cncWorkbench...\Control\CAN\DCF-Files to select the relevant DCF file.
  • Now go to Connection -> CAN settings
CAN-Einstellungen

Figure 4: Menu for the CAN settings

  • In the following menu, pay attention to the correct CAN node indicate!
    • 1 for X-axis
    • 2 for Y-axis
  • Select the DLL for CAN communication: C:\CNCWorkbench\Control\CAN\CAN_API.dll
  • Confirm with OK
CAN-Konfiguration

Figure 5: CAN configuration for X-axis (address: 1)

  • Select "Connection" -> "Online mode" (or click on the satellite dish).
Onlinemodus

Figure 6: Online mode

  • Select the PC to card option in the following dialogue.
PC-zur-Karte

Figure 7: PC to card option

  • If no message appears, you can exit online mode and close the programme. The question about saving is answered in the negative.