Installation

GP InsoleCAD is part of the GP Manager and must be activated by a GeBioM employee. If you GP InsoleCAD with the GP Manager, the module should already be activated.

Do you have GP InsoleCAD newly purchased, the module can be activated subsequently in a support session; the computer requires an Internet connection for this.

Installation

Installation

Installation

  1. First install the software from the provided CD. This is necessary, since the CD contains all drivers for the hardware components in a packed format. Those can only be used from the hard drive after installation. Insert the CD into your CD-ROM drive. The installation begins automatically. Please now follow the installation instructions.
  2. Following the installation, the receiver is connected to the PC's USB hub (necessarily USB 2.0) using the provided USB-cable.
  3. The operating system recognises the receiver as new device and Window's hardware installation assistant starts.
  4. Please choose the point "Install software from a list or a specific source..." in the first box. Then click on "continue„.
  5. In the following box please choose the option "search this source for the fitting driver" and select the control box "also search the following sources". Then use "browse" to select the path "C:\GeBioM_SQL\GPTools\Driver\Radio" (folder for radio drivers). Then click on "continue„.
  6. Confirm or continue through the following dialogue boxes.
  7. In the final box the driver is now indicated as "Cesys CeUsb2 (unconfigured)„.
    ATTENTION:
    The installation is not yet finished The device is still "unconfigured".
  8. After clicking on "complete" MobilData is again recognised and the driver installation is completed. Here, the steps 3 to 7 are re-run and when the installation is completed the driver is indicated as "Cesys CeUsb2„.
  9. After clicking on "complete" the installation is completed and GP
    MobilData Radio is ready for use.

Installation

  1. First install the software from the provided CD. This is necessary, since the CD contains all drivers for the hardware components in a packed format. Those can only be used from the hard drive after installation. Insert the CD into your CDROM drive. The installation begins automatically. Please now follow the installation instructions.
  2. Following the installation, the receiver is connected to the PC's USB hub (necessarily USB 2.0) using the provided USB-cable.
  3. The operating system recognises the receiver as new device and Window's hardware installation assistant starts.
  4. Please choose the point "Install software from a list or a specific source..." in the first box. Then click on "continue„
  5. In the following box please choose the option "search this source for the fitting driver" and select the control box "also search the following sources„.
  6. Confirm or continue through the following dialogue boxes.
  7. In the final box the driver is now indicated as "Cesys CeUsb2 (unconfigured)".
    ATTENTION:
    The installation is not yet finished The device is still "unconfigured".
  8. After clicking on "complete" MobilData is again recognised and the driver installation is completed. Here, the steps 3 to 7 are re-run and when the installation is completed the driver is indicated as "Cesys CeUsb2„.
  9. After clicking on "complete" the installation is completed and GP MobilData Radio is ready for use.

Installation

The analysis programmes cannot be installed independently. They are part of the GP Manager and are added during its installation.