Installation

Attention:

If you use the transmitter for several weeks Do not use, Please charge the battery first. Otherwise a deep discharge may occur. This is harmful to a lithium-ion battery! To prevent damage to the battery during longer storage periods Check the charge status of the batteries every 4-6 weeks to avoid deep discharge of the batteries.

To extend the service life, the batteries should be not over a longer period of time be exposed to high temperatures. Make sure that you store the batteries at temperatures below 30 °C store.

2.1 Firstly, please charge the two MODA WiFi transmitters (1). To do this, connect them to the USB port of your computer using the enclosed charging cable (3). During the first charging process, it is important that the computer is connected to the Internet so that Windows can download a corresponding driver. The transmitter is being charged when the LED (10) lights up orange and is fully charged when the LED goes out again. A complete charging process takes approx. 3 hours. The battery life of the transmitter is around 8 hours. When the battery is low, the LED (11) lights up red. Alternatively, the transmitters can also be charged using a USB socket adapter, similar to (7).
2.2 Install the GP Manager from the enclosed data carrier.
2.3 The router (4) must be supplied with power during the measurement process. There are two ways of doing this, depending on the area of application. If you mainly use MobilData WiFi within the same premises, it is advantageous to connect the router to a nearby power socket. Use the charging cable (6) and the supplied adapter (7) for this. For mobile applications, you can supply the router with power via the USB port on your computer.
2.4 Data is transferred between the transmitter and computer via WLAN. The WLAN stick turns your computer into a WLAN-capable end device. Please insert the WLAN stick (5) into a free USB port on your computer. The stick will install itself automatically if an Internet connection is available. If your PC already has a WLAN interface because you are using MobilData on a laptop, for example, you can also use the internal WLAN interface on your laptop.