2 MODA-WiFi transmitters
5 pairs of measuring soles
2 USB charging cables (transmitter)
1 Router
1 WLAN stick
1 USB charging cable (router)
1 230V adapter
2 leg straps

2.1 Firstly, please charge the two MODA WiFi transmitters (1). To do this, connect them to the USB port of your computer using the enclosed charging cable (3). During the first charging process, it is important that the computer is connected to the Internet so that Windows can download a corresponding driver. The transmitter is being charged when the LED (10) lights up orange and is fully charged when the LED goes out again. A complete charging process takes approx. 3 hours. The battery life of the transmitter is around 8 hours. When the battery is low, the LED (11) lights up red. Alternatively, the transmitters can also be charged using a USB socket adapter, similar to (7).

2.2 Install the GP Manager from the enclosed data carrier.
2.3 The router (4) must be supplied with power during the measurement process. There are two ways of doing this, depending on the area of application. If you mainly use MobilData WiFi within the same premises, it is advantageous to connect the router to a nearby power socket. Use the charging cable (6) and the supplied adapter (7) for this. For mobile applications, you can supply the router with power via the USB port on your computer.
2.4 Data is transferred between the transmitter and computer via WLAN. The WLAN stick turns your computer into a WLAN-capable end device. Please insert the WLAN stick (5) into a free USB port on your computer. The stick will install itself automatically if an Internet connection is available. If your PC already has a WLAN interface because you are using MobilData on a laptop, for example, you can also use the internal WLAN interface on your laptop.

3.1 Ensure the power supply to the router.
3.2 Check whether the WLAN stick is connected to the USB port of your computer or whether you have switched on the laptop's internal WLAN.
3.3 Please connect the measuring soles to the transmitters. Pay attention to the correct labelling (L= left; R= right).
Attention: Make sure that the plug engages correctly!
3.4 Now place the soles in the shoes and attach the two transmitters to the customer's lower leg using the leg straps (8). The cable should not be under tension!
3.5 Switch on the transmitter (12). If the transmitter is switched on, the adjacent LED lights up. After a few seconds, the WLAN LED (9) on your transmitter lights up. This means that the transmitter is correctly connected to the router.
3.6 Now establish a connection between the computer and the router. To do this, click on the network icon ( or ) in the bottom right-hand corner of the screen. Click on "MODA WiFi router" (see Figure 3). The "Establish connection automatically" checkbox should remain ticked.
Then click on "Connect". The password is: 12345678