GP LaserScan 3D flat

Dear customer,

We are pleased that you have decided in favour of our product. Please read the operating instructions carefully and follow the instructions.

 

With friendly recommendation

Your GeBioM team

 

• Please read these instructions for use carefully, keep them for future reference, make them available to other users and follow these instructions.
• The target group for this device is the specialist in the relevant field: orthopaedic (shoe) technician, engineer, biomechanist, ergonomist, etc.
  The system is not intended for end users.
• In principle, the specialist should endeavour to expand and develop his or her specialist knowledge of the biomechanical relationships involved in walking, sitting and running, as the device only provides the basics and the specialist must decide personally on the measures to be taken.
• In the event of occurring or suspected malfunctions, the user should contact the manufacturer at an early stage, especially in the orthopaedic fields of application.
• This device is a sensitive electronic measuring instrument.
• Please handle it with care and do not walk on the appliance with shoes.
• Do not expose the measuring device to direct sunlight.
• The device should be in the room in which the measurement is being carried out for at least 30 minutes.
• The device is not waterproof. For this reason, direct contact with water or other liquids must be avoided. However, if liquid should penetrate the device, further use must be avoided. In this case, please contact the manufacturer.
• The appliance is only intended for the purpose specified in these instructions for use. Any misuse will invalidate the warranty.
• Repairs may only be carried out by persons authorised by the manufacturer. Otherwise the warranty will be invalidated.
• The measuring surface of the device must be cleaned with a soft cloth moistened with disinfectant before or after each use.
• It must be possible to walk or run in front of and behind the device without tripping

• With class 2 laser systems, the accessible laser radiation is harmless to the skin. Short-term irradiation of the eyes is also harmless due to the low power. The eye is protected by the natural eyelid protection reflex during prolonged intensive irradiation.
• The device uses a laser of laser class 2.
• To avoid irritation of the eyes during operation, you should not directly into the laser source.
• Diffuse reflections from the laser are absolutely harmless.

• Only use the original power supply unit for this device (12 V, 3.0 A ). The use of an unauthorised power supply unit can damage the device or be dangerous for this device.
• Do not place any objects on the mains cable. Also ensure that people do not step on the power cable or get caught in it.
• Do not use the mains adapter if the device or the mains cable is damaged. Switch off the device and unplug the power adapter from the socket immediately.
• Never insert or remove the mains cable from the socket with wet hands.
• Disconnect the appliance from the socket before cleaning it. Do not use any liquid cleaners or sprays. Use a damp cloth for cleaning.
• Connect the mains adapter before connecting the mains cable to the mains socket.
• Unplug the mains cable from the socket before removing the mains adapter from the appliance.

1. On/off switch
2. Measuring surface
3. Serial number
4. Control unit and camera connection
5. Foot switch connection (not used in the GP Manager)
6. Connection for the power supply unit

Please first check that the appliance is complete and undamaged. If in doubt, do not use the appliance and contact the manufacturer.

The scope of delivery of the GP Laser Scan 3D Flat includes

• 1 GP LaserScan 3D (laser scanner for plantar measurement of feet / plasters / impact foams)
• 1 power supply unit (12 V, 3.0 A )
• 1 USB 2.0 connection cable (approx. 2.8 metres)
• 1 foot switch with connection cable (approx. 2.4 metres)
• 1 DVD or 1 USB stick (with drivers and tools)
• 1 instruction manual

The packaging is reusable or can be returned to the raw material cycle. Please dispose of packaging material that is no longer required properly. If you notice any transport damage during unpacking, please contact the manufacturer immediately.

WARNING 

Make sure that the packaging film does not get into the hands of children.
There is a risk of suffocation!

 

The device is designed for scanning plantar foot moulds, plaster casts or impact foams. For this purpose, the device is placed on a firm and non-slip surface or installed in a platform. Either the customer's foot without footwear, a foot foam or a plaster model is placed on the measuring surface (2) of the device. A traversing unit equipped with a camera and laser scans the entire sole of the foot, the tread foam or the plantar side of the plaster model at a speed of 2-4 seconds per scan. A digital photo of the foot is also generated. The data obtained forms the basis for creating a grid model with millimetre-precise measurements of the plantar foot shape and the arch of the foot.

The camera and laser unit are controlled and the measurement data is transferred to the PC. The measured values are displayed on the PC in the GP LaserScan software module and can be analysed there.

WARNING

It must be possible to walk or run in front of and behind the device without tripping.

Start the GP Manager.

Create a new customer or call up an existing one. To do this, click on the "Customers" button in the menu bar on the start page . The following view then appears:

To create a new customer, please complete at least the mandatory fields (marked with an *). The year of birth can be entered in the format DDMMYY without dots. Use the "Import health insurance card" button  you have the option of reading the customer data directly from the health insurance card using an external card reader. The customer data is automatically saved when you click on the arrow button  to return to the start page.

To search for a customer, please enter the following in the search field  enter the first few letters of the customer's surname. The search starts automatically if at least three letters of the surname have been entered. If fewer letters are entered, the search is started by pressing the "Return" key. It is also possible to search by date of birth (e.g. 01/01/2001), by customer number (e.g. O_4) or by abbreviated surname (e.g. M*).

The existing customers that match the search are displayed in the field below. Click on the relevant customer to select it and the customer data will appear in the customer screen. To be able to carry out a measurement with the selected customer, please return to the start page first. Click on the arrow  to return to the start page, the selected customer is accepted and displayed in the black menu bar.

Without having created or called up a customer, no measurement can be carried out or called up with the measuring system.

Start the GP FussMess module on the start page:

You get the following view:

In the selection menu, select LaserScan (if not already selected).

Place the tread foam on the measuring surface (2) so that the heel points towards the on/off switch (1).

Start the measurement by selecting which footfall foam you want to scan.

The measurement is triggered with "Scan page".

Important! Ensure that there are no direct light sources (lamps, fluorescent tubes, etc.) above the scanner. If the room is painted in red or orange colours, these could also have a negative effect on the measurement. Dark colours such as black and blue cannot be detected by the laser.

Repeat the process for the other foot. Please ensure that the pages are scanned correctly, as it is not possible to swap the pages afterwards.

Both scanned impact foams should now be displayed in an isobar representation.

 

Start the GP Manager.

Create a new customer or call up an existing one. To do this, click on the "Customers" button in the menu bar on the start page. The following view then appears:

To create a new customer, please complete at least the mandatory fields (marked with an *). The year of birth can be entered in the format DDMMYY without dots. Use the "Import health insurance card" button  you have the option of reading the customer data directly from the health insurance card using an external card reader. The customer data is automatically saved when you click on the arrow button  to return to the start page.

To search for a customer, please enter the following in the search field  enter the first few letters of the customer's surname. The search starts automatically if at least three letters of the surname have been entered. If fewer letters are entered, the search is started by pressing the "Return" key. It is also possible to search by date of birth (e.g. 01/01/2001), by customer number (e.g. O_4) or by abbreviated surname (e.g. M*).

The existing customers that match the search are displayed in the field below. Click on the relevant customer to select it and the customer data will appear in the customer screen. To be able to carry out a measurement with the selected customer, please return to the start page first. Click on the arrow  to return to the start page, the selected customer is accepted and displayed in the black menu bar.

Without having created or called up a customer, no measurement can be carried out or called up with the measuring system.

Start the GP FussMess module on the start page:

You get the following view:

In the selection menu, select LaserScan (if not already selected).

If you want to scan a foot, place the foot in the centre of the glass surface. Make sure that the tip of the foot is pointing in the direction of the on/off switch (1):

Start the measurement by selecting which foot you want to scan.

The measurement is triggered with "Scan page".

Important! Ensure that there are no direct light sources (lamps, fluorescent tubes, etc.) above the scanner. If the room is painted in red or orange colours, these could also have a negative effect on the measurement. Dark colours such as black and blue cannot be detected by the laser.

Repeat the process for the other foot. Please ensure that the pages are scanned correctly, as it is not possible to swap the pages afterwards.

Both feet should now be displayed.